Electronics / Optics
Melt Blown Filter CartridgesString-Wound Filter CartridgesActivated Carbon Filter CartridgesPleated Filter CartridgesCapsule FiltersLiquid Filter BagsStainless Steel Filter CartridgesStainless Steel Cartridge Filter HousingsStainless Steel High Pressure Bag Filter HousingsPlastic Housing
┃Melt Blown Filter Cartridges┃
Melt-Blown Filter Cartridges
Type PP Melt-Blown Filter Cartridges
Material Polypropylene
Length 5, 6, 9.75, 10, 19.5, 20, 29.25, 29.5, 30, 39, 40 inch and customized
Micron Rating 1, 5, 10, 25, 50, 75, 100 μm
End Cap DOE, 2-222Fin, 2-222Flat, 2-226Fin, 2-226Flat
Operating Data ∆P : 3.0 bar at 25°C, 2.0 bar at 40°C, 1.0 bar at 60°C
Applications PCB, Electroplating, Reverse Osmosis Pretreatment, Reclaimed Water Treatment, Chemical and Petrochemical Processing, Food and Beverage
Absolute-Rated Melt-Blown Filter Cartridges
Type PP Absolute-Rated Melt-Blown Filter Cartridges
Filter Media Polypropylene
Length 5, 6, 9.75, 10, 19.5, 20, 29.25, 29.5, 30, 39, 40 inch and customized
Micron Rating 0.5, 1, 3, 5, 10, 25, 50, 75, 100 μm
End Cap DOE, 2-222 Fin, 2-222 Flat, 2-226 Fin, 2-226 Flat
Operating Data ∆P : 4.0 bar at 25°C, 2.0 bar at 60°C, 1.0 bar at 80°C
Applications Flexible Particles Involving Process, Electroplating, Chemical and Petrochemical Processing, High Temperature and Pressure Manufacturing Process
┃String-Wound Filter Cartridges┃
String-Wound Filter Cartridges
Material Polypropylene, Bleached Cotton, Glass Fiber
Central Core PP, SUS304, SUS316
Length 9.75, 10, 19.5, 20, 29.25, 29.5, 30, 39, 40 inch and Customized
Micron Rating 1, 5, 10, 20, 30, 50, 75, 100, 150 μm
End Cap DOE, 2-222 Fin, 2-222 Flat, 2-226 Fin, 2-226 Flat
PP Type
Applications		 PCB, Electroplating, Chemical and Petrochemical Processing,Reclaimed Water Treatment, Food and Beverage
Cotton Type
Applications		 Solvent, Ultrasonic cleaning, Chemical and Petrochemical Processing, Beverage Industry, High Temeprature Processes, Steam Filtration
Glass Fiber Type
Applications		 High Temperature Filtration up to 250°C
Large Size Filter Cartridges
Type PP Melt Blown, String Wound, Pleated, Activated Carbon
Length 10, 20 inch
Micron Rating 0.5, 1, 5, 10, 25, 50, 100 μm
Flow Rate 10 ~ 40 GPM
Depending on selected filter element
Applications PCW, Pre RO/DI, Household Water Filtration, Waste Water Treatment
┃Activated Carbon Filter Cartridges┃
Activated Carbon Block Filter Cartridges
Type Nominal Type: 10, 20, 30, 40 inch
High Flow Large Size: 10, 20 inch
Applications PCB, Electroplating, Reverse Osmosis Pretreatment, Chemical Processing, General Filtration, Reclaimed Water Treatment
Activated Carbon Nonwoven Fabric Filter Cartridges
Type Nominal Type: 10, 20, 30, 40 inch
High Flow Large Size: 10, 20 inch
Applications PCB, Electroplating, Reverse Osmosis Pretreatment, Chemical Processing, General Filtration, Reclaimed Water Treatment
Carbon Impregnated Cellulose Filter Cartridges
Type Nominal Type: 10, 20, 30, 40 inch
High Flow Large Size: 10, 20 inch
Applications PCB, Electroplating, Reverse Osmosis Pretreatment, Chemical Processing, General Filtration, Reclaimed Water Treatment
Granular Carbon PP String Wound Filter Cartridges
Type Nominal Type: 10, 20, 30, 40 inch
High Flow Large Size: 10, 20 inch
Applications PCB, Electroplating, Reverse Osmosis Pretreatment, Chemical Processing, General Filtration, Reclaimed Water Treatment
Customized Activated Carbon Nonwoven
Type Nominal Type: 10, 20, 30, 40 inch
High Flow Large Size: 10, 20 inch
Applications PCB, Electroplating, Reverse Osmosis Pretreatment, Chemical Processing, General Filtration, Reclaimed Water Treatment
Large Size Filter Cartridges
Type PP Melt Blown, String Wound, Pleated, Activated Carbon
Length 10, 20 inch
Micron Rating 0.5, 1, 5, 10, 25, 50, 100 μm
Flow Rate 10 ~ 40 GPM
Based on selection of filter element
Applications PCW, Pre RO/DI, Household Water Filtration, Waste Water Treatment
┃Pleated Filter Cartridges┃
PP Fiber Pleated Filter Cartridges
Length 5, 10, 20, 30, 40, 50, 60, 70 inch
Outside Diameter Ø65mm, Ø69mm, Ø83mm
End Caps DOE, 2-222 FLAT, 2-222 FIN, 2-226 FLAT, 2-226 FIN
Gasket/O-ring Silicone, EPDM, Viton, PTFE Encapsulated Viton, PTFE
Applications RO/DI Process, Ink, Etchants, Developers, Chemicals, Medicine Filtration, Process Gases, Food & Beverage
Filter Media Polypropylene
Micron Rating 0.2, 0.5, 0.8, 1, 2, 3, 5, 10, 20, 30, 40, 50, 70, 100 μm
Operating Data ∆P : 4.8 bar at 25°C, 1.4 bar at 80°C
PES Membrane Pleated Filter Cartridges
Length 5, 10, 20, 30, 40, 50, 60, 70 inch
Outside Diameter Ø65mm, Ø69mm, Ø83mm
End Caps DOE, 2-222 Flat, 2-222 Fin, 2-226 Flat, 2-226 Fin
Gasket/O-ring Silicone, EPDM, Viton, PTFE Encapsulated Viton, PTFE
Applications RO/DI Process, Ink, Etchants, Developers, Chemicals, Medicine Filtration, Process Gases, Food & Beverage
Filter Media Polyethersulfone
Micron Rating 0.04, 0.1, 0.2, 0.45, 0.8, 1.2, 5 μm
Operating Data ∆P : 4.8 bar at 25°C, 1.4 bar at 80°C
Hydrophobic PTFE Membrane Pleated Filter Cartridges
Length 5, 10, 20, 30, 40, 50, 60, 70 inch
Outside Diameter Ø65mm, Ø69mm, Ø83mm
End Caps DOE, 2-222 FLAT, 2-222 FIN, 2-226 FLAT, 2-226 FIN
Gasket/O-ring Silicone, EPDM, Viton, PTFE Encapsulated Viton, PTFE
Applications RO/DI Process, Chemicals, Medicine Filtration, Food & Beverage, Cooling water circulation
Filter Media Hydrophobic PTFE
Micron Rating 10, 15, 20, 30nm
0.05, 0.1, 0.2, 0.45, 1, 3, 5, 10 μm
Operating Data ∆P : 4.8 bar at 25°C, 2.1 bar at 90°C
Hydrophilic PTFE Membrane Pleated Filter Cartridges
Length 5, 10, 20, 30, 40, 50, 60, 70 inch
Outside Diameter Ø65mm, Ø69mm, Ø83mm
End Caps DOE, 2-222 FLAT, 2-222 FIN, 2-226 FLAT, 2-226 FIN
Gasket/O-ring Silicone, EPDM, Viton, PTFE Encapsulated Viton, PTFE
Applications RO/DI Process, Chemicals, Medicine Filtration, Food & Beverage, Cooling water circulation
Filter Media Hydrophilic PTFE
Micron Rating 10, 15, 20, 30nm
0.05, 0.1, 0.2, 0.45, 1, 3, 5, 10 μm
Operating Data ∆P : 4.8 bar at 25°C, 2.1 bar at 90°C
Polysulfone Membrane Pleated Filter Cartridges
Length 5, 10, 20, 30, 40, 50, 60, 70 inch
Outside Diameter Ø65mm, Ø69mm, Ø83mm
End Caps DOE, 2-222 FLAT, 2-222 FIN, 2-226 FLAT, 2-226 FIN
Gasket/O-ring Silicone, EPDM, Viton, PTFE Encapsulated Viton, PTFE
Applications RO/DI Process, Ink, Etchants, Developers, Chemicals, Medicine Filtration, Process Gases, Food & Beverage
Filter Media Polysulfone
Micron Rating 0.05, 0.1, 0.2, 0.45, 0.6, 1 μm
Operating Data ∆P : 4.8 bar at 25°C, 2.1 bar at 90°C
PVDF Membrane Pleated Filter Cartridges
Length 5, 10, 20, 30, 40, 50, 60, 70 inch
Outside Diameter Ø65mm, Ø69mm, Ø83mm
End Caps DOE, 2-222 FLAT, 2-222 FIN, 2-226 FLAT, 2-226 FIN
Gasket/O-ring Silicone, EPDM, Viton, PTFE Encapsulated Viton, PTFE
Applications RO/DI Process, Chemicals, Medicine Filtration, Food & Beverage, Cooling water circulation
Filter Media PVDF
Micron Rating 0.1, 0.2, 0.45, 1 μm
Operating Data ∆P : 4.8 bar at 25°C, 2.1 bar at 90°C
Nylon Membrane Pleated Filter Cartridges
Length 5, 10, 20, 30, 40, 50, 60, 70 inch
Outside Diameter Ø65mm, Ø69mm, Ø83mm
End Caps DOE, 2-222 FLAT, 2-222 FIN, 2-226 FLAT, 2-226 FIN
Gasket/O-ring Silicone, EPDM, Viton, PTFE Encapsulated Viton, PTFE
Applications RO/DI Process, Chemicals, Medicine Filtration, Food & Beverage, Cooling water circulation
Filter Media Nylon
Micron Rating 5, 10, 20, 50 nm
0.1, 0.2, 0.45, 1 μm
Operating Data ∆P : 4.8 bar at 25°C, 2.1 bar at 90°C
Glass Fiber Pleated Filter Cartridges
Length 5, 10, 20, 30, 40, 50, 60, 70 inch
Outside Diameter Ø65mm, Ø69mm, Ø83mm
End Caps DOE, 2-222 FLAT, 2-222 FIN, 2-226 FLAT, 2-226 FIN
Gasket/O-ring Silicone, EPDM, Viton, PTFE Encapsulated Viton, PTFE
Applications RO/DI Process, Chemicals, Medicine Filtration, Food & Beverage, Cooling water circulation
Filter Media GLASS FIBER
Micron Rating 0.2, 0.45, 1, 5, 10 μm
Operating Data ∆P : 4.8 bar at 25°C, 2.1 bar at 90°C
High-Flow Pleated Filter Cartridges
Filter Media Polypropylene, Polyester
Length 5, 10, 20, 30, 40 inch , other Customized Sizes
Micron Rating 0.5, 1, 5, 10, 20, 30, 50, 100 μm
End Caps DOE, 2-222 Flat, 2-222 Fin, 2-226 Flat, 2-226 Fin
Operating Data ∆P : 3.0 bar at 25°C, 2.4 bar at 50°C
Applications PCW, Pre RO/DI, Chemical Processing
┃Capsule Filters┃
Capsule Filters
Filter Media Polypropylene, Polyethersulfone,
Nylon, PTFE, PVDF, Glass Fiber
Size Ø72 x 96 mm, Ø72 x 155 mm
Port Size 1/4″, 3/8″, 1/2″ NPTM
1/4″, 3/8″, 1/2″ Swagelok , other customized Sizes
Micron Rating 10, 15, 20, 30, 40, 50 nm
0.1, 0.2, 0.45, 0.6, 0.8,
1, 2, 3, 5, 10, 20, 30, 40, 70 μm
Operating Data 4.8 bar at 25°C
Applications Photoresists, Pharmaceuticals, Small Volume Filtration,Laboratory Facilities, Air Filtration
┃Liquid Filter Bags┃
Liquid Filter Bags
Filter Media PP, PET, Nylon, Teflon, Nomex
Including various types of woven and non-woven fabrics, oil-absorbing fabrics, and activated carbon media.
Top Ring PP, Nylon, Santoprene, Galvanized Steel, Stainless Steel
Ring Type FSI, EATON and Others
Seam Sewn, Welded
Micron Rating 0.5 ~ 1000 μm
Size #1 (Ø17.8 cm × 42 cm, Q : 20 CMH)
#2 (Ø17.8 cm × 81 cm, Q : 45 CMH)
#3 (Ø10.1 cm × 23 cm, Q : 4.5 CMH)
#4 (Ø10.1 cm × 38 cm, Q : 10 CMH)
X100 Series (Ø15 cm × 52 cm)
U Series (Ø11.8 cm × 52 cm)
BP Series (Ø22 cm × 43 cm)
Y Series (Ø20 cm × 33 cm)
Others
Filter Clothes
Filter Media PP, PET, Nylon, oil-absorbing fabric, activated carbon fabric
Type Non-Woven, Woven, Brushed Woven, Woven Mesh
Micron Rating 0.5 ~ 1000 μm
┃Stainless Steel Filter Cartridges┃
Pleated Wire Mesh Filter Cartridges
Material SUS304, SUS316, SUS316L
Length 5, 10, 20, 30, 40 inch and Customizable lengths available
Micron Rating 1 ~ 1000 μm
Mesh Type Plain Weave, Dutch Twill Weave, Plain Dutch Weave,
Metal Fiber Non-woven, 3-or 5-layer sintered mesh
End Caps DOE, 2-222, 2-226, and others
Max. Operating Temperature 350°C
Max. Operating Pressure 5 ~ 250 bar (based on specific requirements)
Applications CPF, CPL, Petrochemical Processing, Acid/Alkali,High Density Treatment, Steam Filtration, Beverage Industry
Pleated Non-woven Metal Fiber Filter Cartridges
Material SUS316, SUS316L
Length 5, 10, 20, 30, 40 inch and Customizable lengths available
Micron Rating 3 ~ 60 μm
Type Non-woven metal fiber
End Caps DOE, 2-222, 2-226, and others
Max. Operating Temperature 350°C
Max. Operating Pressure 5 ~ 250 bar (based on specific requirements)
Applications CPF, CPL, Petrochemical Processing, Acid/Alkali,High Density Treatment, Steam Filtration, Beverage Industry
5-Layer Sintered Wire Mesh Filter Cartridges
Material SUS304, SUS316, SUS316L
Length 5, 10, 20, 30, 40 inch and Customizable lengths available
Micron Rating 1 ~ 200 μm
Type 5-Layer Sintered Wire Mesh
End Caps DOE, 2-222, 2-226, and others
Max. Operating Temperature 350°C
Max. Operating Pressure 5 ~ 250 bar (based on specific requirements)
Applications CPF, CPL, Petrochemical Processing, Acid/Alkali,High Density Treatment, Steam Filtration, Beverage Industry
┃Stainless Steel Cartridge Filter Housings┃
Stainless Steel Cartridge Filter Housings
Filter Length 5, 10, 20, 30, 40 inch
Number of Cartridges 3~ 7 rounds
Material SUS304, SUS316, SUS316L
In/Outlet 1, 1 1/2, 2, 2 1/2, 3, 4 inch NPT,BSP,Flange,Clamp,Others
Flow Rate 10″:0 ~ 7 CMH 20″:0 ~ 14 CMH
30″:0 ~ 21 CMH 40″:0 ~ 28 CMH
*Above flowrate is based on standard PP melt blown cartridge; Flowrate may vary according to different filter elements,High flow filter is optional to increase the flow and reduce the differential pressure.
Closure Type V-Clamp
Max.Operating Pressure 7 bar
Applications Reverse Osmosis Pretreatment, PCW Filtration, Circulating Filtration, Chemical Processing, Reclaimed Water Treatment, Beverage Industry
High-Flow Multi-Cartridge Filter Housings
Filter Length 5, 10, 20, 30, 40 inch
Number of Cartridges 9 ~ 173rounds
Material SUS304, SUS316, SUS316L
In/Outlet 2 ~ 15 inch Flange
Flow Rate 0 ~ 1384 CMH
Depending on the specification and quantity of the filter cartridges
Max.Operating Pressure 10 bar
Applications Reverse Osmosis Pretreatment, PCW Filtration, Circulating Filtration, Chemical Processing, Reclaimed Water Treatment, Beverage Industry
Stainless Steel Single-Cartridge Filter Housings
Filter Length 5, 10, 20, 30, 40 inch
Available in Ø145 mm for 10″ and 20″ models
Material SUS304, SUS316
In/Outlet 3/4″, 1″ NPTF, 1 1/2″ Flange
Closure Type V-Clamp
Flow rate 0.5 ~ 10 CMH
Flow rate may vary according to different model & element type
Filter Type DOE, 2-222 Flat, 2-222 Fin
Max.Operating Pressure 7 bar
Applications Circulating Filtration System, PCW, Chemical Processing
Stainless Steel Sanitary Filter Housings
Filter Length 10, 20, 30, 40 inch
Number of Cartridges single or multi-round
Material SUS304, SUS316, SUS316L
In/Outlet 1 ~ 6 inch Sanitary Clamp
Finish Mechanical Polishing 400 mesh
Max.Operating Pressure 7 bar
Higher pressure housings can be customized
Applications Pharmaceutical, Beverage Industry,Chemical Processing, Ultrapure Water Filtration
┃Stainless Steel High Pressure Bag Filter Housings┃
Stainless Steel Bag Filter Housings
Filter Size & Flow Rate #1: up to 20 CMH ; #2: up to 45 CMH
#3: up to 4.5 CMH ; #4: up to 10 CMH
Flowrate may vary according to different filter elements
Material SUS304, SUS316, SUS316L
In/Outlet 1, 1 1/2, 2, 2 1/2, 3, 4 inch NPT,BSP,Flange,Clamp,Others
Closure Type Swing Bolt
Max.Operating Pressure 7 bar
Applications Reverse Osmosis Pretreatment, PCW Filtration, Circulating Filtration, Chemical Processing, Reclaimed Water Treatment, Beverage Industry
High-Flow Multi-Bag Filter Housings
Filter Size #1, #2
Number of Filter Bags 2 ~ 50
Material SUS304, SUS316, SUS316L
In/Outlet 2 ~ 15 inch Flange
Flow Rate 0 ~ 2250 CMH
Depending on the specification and quantity of the filter bags
Max.Operating Pressure 10 bar
Applications Reverse Osmosis Pretreatment, PCW Filtration, Circulating Filtration, Chemical Processing, Reclaimed Water Treatment, Beverage Industry
Stainless Steel High Pressure Bag Filter Housings
Filter Size & Flow Rate #1: up to 20 CMH ; #2: up to 45 CMH
#3: up to 4.5 CMH ; #4: up to 10 CMH
Flowrate may vary according to different filter elements
Material SUS304, SUS316, SUS316L
In/Outlet 1, 1 1/2, 2, 2 1/2, 3, 4 inch NPT,BSP,Flange,Clamp,Others
Closure Type Swing Bolt
Max. Operating Pressure 10 bar
Applications Reverse Osmosis Pretreatment, PCW Filtration, Circulating Filtration, Chemical Processing, Reclaimed Water Treatment, Beverage Industry
┃Plastic Housing┃
Plastic Filter Housings
Filter Length 5, 10, 20 inch
Material Clear: Styrene Acrylonitrile (SAN),
Blue: Polypropylene (PP)
In/Outlet 1/4″, 1/2″, 3/4″ NPTF
Type O-ring quantity: Single, Double
Flow Rate Up to 2.5 CMH
Flowrate may vary according to different filter elements.
Filter Type DOE
Color Clear, Blue
Max.Operating Pressure 7 bar at 25°C, 2 bar at 40°C
Applications Circulating Filtration System,Reverse Osmosis Pretreatment, PCW Filtration
Large-Size Plastic Filter Housings
Filter Length 10, 20 inch
Material Clear:Styrene Acrylonitrile (SAN),
Blue: Polypropylene (PP)
In/Outlet 1″, 1 1/2″ NPTF
Type O-ring Quantity Single, Double
Flow Rate Up to 10 CMH
Flowrate may vary according to different filter elements.
Filter Type DOE
Color Clear, Blue
Max.Operating Pressure 7 bar at 25°C, 2 bar at 40°C
Applications Circulating Filtration System,Reverse Osmosis Pretreatment, PCW Filtration

半導體濾芯摺疊濾芯球型濾芯熔噴濾芯纏繞濾芯活性碳濾芯濾袋不鏽鋼濾芯
┃半導體濾芯┃

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Proin urna nibh, laoreet vel lacinia sit amet

ALL PFA濾芯

ALL PFA Filter Cartridges

型  式 ALL PFA濾芯
材  質 濾膜:親水性PTFE, 疏水性PTFE
支撐材:PFA
外殼、中柱、上下端蓋:PFA
O-ring:PTFE encapsulated Viton
精  度 10, 15, 20, 30 nm
0.05, 0.1, 0.2, 0.45, 1, 3, 5, 10 μm
規  格 4, 10, 20, 30 inch 及特殊尺寸規格
濾芯外徑 Ø69mm, Ø83mm
端  蓋 2-222平尾
操作範圍 ∆P : 5.0 bar at 25°C, 0.5 bar at 180°C
適用範圍 濕蝕刻, 精密化學品
ALL PFA化學品濾芯

ALL PFA Filter Cartridges for Chemicals

材  質 ALL PFA
主 濾 材 親水性 PTFE
In/Outlet口徑 3/4″ Super
Vent/Drain口徑 1/2″ Super
精  度 0.03、0.05、0.1、0.2μm
最大操作溫度 180°C
最大操作壓力 ∆P : 5.8 bar at 25°C, 0.97 bar at 180°C
適用範圍 濕蝕刻, 精密化學品, 高溫/高腐蝕性製程
ALL PFA氣體濾芯

ALL PFA In-Line Gas Filter Cartridges

主 濾 材 PTFE
規  格 1/8″ In/Out Swagelok
精  度 0.003μm for gas
操作範圍 7.0 bar at 20°C
快拆式囊式濾芯

Quick-Change Capsule Filter Cartridge

規  格 5 inch: 無閥
10 inch: 無閥/有閥
材  質 Polypropylene, Polyethersulfone, Nylon, PTFE, Glass Fiber
精  度 0.1, 0.2, 0.45, 0.8, 1, 3, 5, 10, 15, 20, 30 μm
操作範圍 ∆P : 4.8 bar at 25°C
適用範圍 製藥業, 膠體過濾, Slurry過濾, 實驗製程
快拆直列式濾芯

Photochemical Dispense Filter

  • 用於塗膠顯影設備
  • 上進/上出的過濾方向
三孔垂直式濾芯

Photochemical Dummy Filter

  • 快速轉接裝置,無需工具即可更換,減少停機時間
三孔直列式濾芯

Photoresist Dummy Filter

  • 適用於極小型光刻膠泵設備,體積小,可快速更換,操作便利
  • 高密度聚乙烯(HDPE)材質結構
光阻濾芯

Photoresist Filter

超純水樹脂濾芯

Ultra pure DI Water Purifier

濾  料 半導體級交換樹脂
外  殼 PP
最高操作溫度 40°C
最高操作壓力 0.3 MPa / 20°C
CMP球型濾芯

CMP Series Capsule Filter

主 濾 材 Polypropylene
材  質 Polypropylene
精  度 0.1, 0.2, 0.5, 1, 5, 10, 20μm
操作範圍 ∆P : 4.0 bar at 25°C
適用範圍 CMP製程, 硫酸銅過濾
CMP摺疊濾芯

CMP Series Pleated Filter Cartridges

型  式 CMP摺疊式濾芯
材  質 Polypropylene
規  格 10, 20, 30 inch
精  度 0.1, 0.2, 0.5, 0.8, 1, 3, 5, 7, 9, 11, 13, 15 μm
端  蓋 2-222平尾
操作範圍 ∆P : 4.8 bar at 25°C
適用範圍 CMP製程
CMP熔噴濾芯

CMP Series Melt-Blown Filter Cartridges

型  式 CMP熔噴濾芯
材  質 Polypropylene
規  格 10, 20, 30 inch
精  度 1, 3, 5, 7, 9, 11, 13 μm
端  蓋 2-222平尾
操作範圍 ∆P : 4.8 bar at 25°C
適用範圍 CMP製程
ALL PFA 過濾器

ALL PFA Filter Housings

規  格 10 inch
材  質 ALL PFA
In/Outlet口徑 1″ Super
Vent/Drain口徑 1/2″ Super
操作壓力 8.0 bar at 25°C
┃摺疊濾芯┃

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Proin urna nibh, laoreet vel lacinia sit amet

PP微孔摺疊式濾芯

Membrane Pleated Filter Cartridges

規  格 5, 10, 20, 30, 40, 50, 60, 70 inch
濾芯外徑 Ø65mm, Ø69mm, Ø83mm
端  蓋 雙開口, 2-222平尾, 2-222火箭尾, 2-226平尾, 2-226火箭尾
密封材質 Silicone, EPDM, Viton, PTFE Encapsulated Viton, PTFE
適用範圍 清洗循環, 化學品製程, 超純水製程, 醫藥製程, 飲料業, 冷卻水循環
  • POLYPROPYLENE (PP)
主 濾 材 Polypropylene
精  度 0.2, 0.5, 0.8, 1, 2, 3, 5, 10, 20, 30, 40, 50, 70, 100 μm
操作範圍 ∆P : 4.8 bar at 25°C, 1.4 bar at 80°C
PES微孔摺疊式濾芯

Membrane Pleated Filter Cartridges

規  格 5, 10, 20, 30, 40, 50, 60, 70 inch
濾芯外徑 Ø65mm, Ø69mm, Ø83mm
端  蓋 雙開口, 2-222平尾, 2-222火箭尾, 2-226平尾, 2-226火箭尾
密封材質 Silicone, EPDM, Viton, PTFE Encapsulated Viton, PTFE
適用範圍 清洗循環, 化學品製程, 超純水製程, 醫藥製程, 飲料業, 冷卻水循環
  • POLYETHERSULFONE (PES)
主 濾 材 Polyethersulfone
精  度 0.04, 0.1, 0.2, 0.45, 0.8, 1.2, 5 μm
操作範圍 ∆P : 4.8 bar at 25°C, 1.4 bar at 80°C
疏水PTFE微孔摺疊式濾芯

Membrane Pleated Filter Cartridges

規  格 5, 10, 20, 30, 40, 50, 60, 70 inch
濾芯外徑 Ø65mm, Ø69mm, Ø83mm
端  蓋 雙開口, 2-222平尾, 2-222火箭尾, 2-226平尾, 2-226火箭尾
密封材質 Silicone, EPDM, Viton, PTFE Encapsulated Viton, PTFE
適用範圍 清洗循環, 化學品製程, 超純水製程, 醫藥製程, 飲料業, 冷卻水循環
  • 疏水性 PTFE
主 濾 材 疏水性 PTFE
精  度 10, 15, 20, 30nm
0.05, 0.1, 0.2, 0.45, 1, 3, 5, 10 μm
操作範圍 ∆P : 4.8 bar at 25°C, 2.1 bar at 90°C
親水PTFE微孔摺疊式濾芯

Membrane Pleated Filter Cartridges

規  格 5, 10, 20, 30, 40, 50, 60, 70 inch
濾芯外徑 Ø65mm, Ø69mm, Ø83mm
端  蓋 雙開口, 2-222平尾, 2-222火箭尾, 2-226平尾, 2-226火箭尾
密封材質 Silicone, EPDM, Viton, PTFE Encapsulated Viton, PTFE
適用範圍 清洗循環, 化學品製程, 超純水製程, 醫藥製程, 飲料業, 冷卻水循環
  • 親水性 PTFE
主 濾 材 親水性 PTFE
精  度 10, 15, 20, 30nm
0.05, 0.1, 0.2, 0.45, 1, 3, 5, 10 μm
操作範圍 ∆P : 4.8 bar at 25°C, 2.1 bar at 90°C
PSU微孔摺疊式濾芯

Membrane Pleated Filter Cartridges

規  格 5, 10, 20, 30, 40, 50, 60, 70 inch
濾芯外徑 Ø65mm, Ø69mm, Ø83mm
端  蓋 雙開口, 2-222平尾, 2-222火箭尾, 2-226平尾, 2-226火箭尾
密封材質 Silicone, EPDM, Viton, PTFE Encapsulated Viton, PTFE
適用範圍 清洗循環, 化學品製程, 超純水製程, 醫藥製程, 飲料業, 冷卻水循環
  • POLYSULFONE
主 濾 材 Polysulfone
精  度 0.05, 0.1, 0.2, 0.45, 0.6, 1 μm
操作範圍 ∆P : 4.8 bar at 25°C, 2.1 bar at 90°C
PVDF微孔摺疊式濾芯

Membrane Pleated Filter Cartridges

規  格 5, 10, 20, 30, 40, 50, 60, 70 inch
濾芯外徑 Ø65mm, Ø69mm, Ø83mm
端  蓋 雙開口, 2-222平尾, 2-222火箭尾, 2-226平尾, 2-226火箭尾
密封材質 Silicone, EPDM, Viton, PTFE Encapsulated Viton, PTFE
適用範圍 清洗循環, 化學品製程, 超純水製程, 醫藥製程, 飲料業, 冷卻水循環
  • PVDF
主 濾 材 PVDF
精  度 0.1, 0.2, 0.45, 1 μm
操作範圍 ∆P : 4.8 bar at 25°C, 2.1 bar at 90°C
Nylon微孔摺疊式濾芯

Membrane Pleated Filter Cartridges

規  格 5, 10, 20, 30, 40, 50, 60, 70 inch
濾芯外徑 Ø65mm, Ø69mm, Ø83mm
端  蓋 雙開口, 2-222平尾, 2-222火箭尾, 2-226平尾, 2-226火箭尾
密封材質 Silicone, EPDM, Viton, PTFE Encapsulated Viton, PTFE
適用範圍 清洗循環, 化學品製程, 超純水製程, 醫藥製程, 飲料業, 冷卻水循環
  • NYLON
主 濾 材 Nylon
精  度 5, 10, 20, 50 nm
0.1, 0.2, 0.45, 1 μm
操作範圍 ∆P : 4.8 bar at 25°C, 2.1 bar at 90°C
Glass Fiber微孔摺疊式濾芯

Membrane Pleated Filter Cartridges

規  格 5, 10, 20, 30, 40, 50, 60, 70 inch
濾芯外徑 Ø65mm, Ø69mm, Ø83mm
端  蓋 雙開口, 2-222平尾, 2-222火箭尾, 2-226平尾, 2-226火箭尾
密封材質 Silicone, EPDM, Viton, PTFE Encapsulated Viton, PTFE
適用範圍 清洗循環, 化學品製程, 超純水製程, 醫藥製程, 飲料業, 冷卻水循環
  • GLASS FIBER
主 濾 材 GLASS FIBER
精  度 0.2, 0.45, 1, 5, 10 μm
操作範圍 ∆P : 4.8 bar at 25°C, 2.1 bar at 90°C
奈米摺疊式濾芯

Nano Pleated Filter Cartridges

規  格 5, 10, 20, 30, 40, 50, 60, 70 inch
濾芯外徑 Ø65mm, Ø69mm, Ø83mm
端  蓋 雙開口, 2-222平尾, 2-222火箭尾, 2-226平尾, 2-226火箭尾
密封材質 Silicone, EPDM, Viton, PTFE Encapsulated Viton, PTFE
適用範圍 電子, 飲料業, 製藥業, 化學品製程, 水處理
  • PTFE
主 濾 材 疏水性 PTFE
精  度 10, 15, 20, 30, 50 nm
操作範圍 ∆P : 4.8 bar at 25°C, 2.1 bar at 90°C
  • NYLON
主 濾 材 Nylon
精  度 5, 10, 20, 50 nm
操作範圍 ∆P : 4.8 bar at 25°C, 2.1 bar at 90°C
大流量摺疊式濾芯

High-Flow Pleated Filter Cartridges

材  質 Polypropylene, Polyester
規  格 5, 10, 20, 30, 40 inch 及特殊尺寸規格
精  度 0.5, 1, 5, 10, 20, 30, 50, 100 μm
端  蓋 雙開口, 2-222平尾, 2-222火箭尾, 2-226平尾, 2-226火箭尾
操作範圍 ∆P : 3.0 bar at 25°C, 2.4 bar at 50°C
適用範圍 PCW過濾, RO前置過濾, 化學品製程
334大流量摺疊式濾芯

334 Series High-Flow Filter Cartridges

主 濾 材 Polypropylene Polyethersulfone
精  度 0.2, 0.5, 0.8, 1,
3, 5, 10, 20, 30,
40, 50, 70, 100 μm		 0.04, 0.1, 0.2,
0.45, 0.6,
0.8, 1.2 μm
O-ring材質 EPDM, Viton, PTFE Encapsulated Viton
操作範圍 ∆P : 4.8 bar at 25°C, 3.4 bar at 50°C, 1.4 bar at 80°C
主 濾 材 PTFE SUS
精  度 0.05, 0.1, 0.2,
0.45, 1,
3, 5, 10 μm		 1, 2, 3, 5,
10, 20, 30,
50, 70, 100 μm
O-ring材質 EPDM, Viton, PTFE Encapsulated Viton
操作範圍 ∆P : 4.8 bar at 25°C, 3.4 bar at 50°C, 1.4 bar at 80°C
233大流量摺疊式濾芯

233 Series High-Flow Filter Cartridges

主 濾 材 Polypropylene Polyethersulfone
精  度 0.2, 0.5, 0.8, 1,
3, 5, 10, 20, 30,
40, 50, 70, 100 μm		 0.04, 0.1, 0.2,
0.45, 0.6,
0.8, 1.2 μm
O-ring材質 EPDM, Viton, PTFE Encapsulated Viton
操作範圍 ∆P : 4.8 bar at 25°C, 3.4 bar at 50°C, 1.4 bar at 80°C
主 濾 材 疏水性PTFE 親水性PTFE
精  度 0.05, 0.1, 0.2,
0.45, 1,
3, 5, 10 μm		 0.05, 0.1, 0.2,
0.45, 1,
3, 5, 10 μm
O-ring材質 EPDM, Viton, PTFE Encapsulated Viton
操作範圍 ∆P : 4.8 bar at 25°C, 3.4 bar at 50°C, 1.4 bar at 80°C
P型特大流量摺疊式濾芯

P-type High-Flow Filter Cartridges

主 濾 材 Polypropylene, Polyester, Glass Fiber, Stainless Steel
規  格 20, 40, 60 inch 及特殊尺寸規格
精  度 0.2, 0.5, 1, 5, 10, 20, 40, 50, 70, 100 μm
流  量 20″:40 CMH , 40″:85 CMH ,60″:110 CMH
操作範圍 ∆P : 4.8 bar at 25°C
適用範圍 RO前置過濾, PCW過濾, 回收水過濾, 大流量過濾, 石化製程
7000型特大流量摺疊式濾芯

7000 Series High-Flow Filter Cartridges

主 濾 材 Polypropylene
規  格 40, 60 inch
精  度 1, 3, 5, 10, 20, 30, 40, 70 μm
流  量 40″:75 CMH ,60″:110 CMH
操作範圍 ∆P : 4.8 bar at 25°C
適用範圍 RO前置過濾, PCW過濾, 回收水過濾, 大流量過濾, 石化製程
袋式摺疊濾芯

Bag Type High Flow Filter Cartridges

材  質 Polypropylene, Polyester
精  度 0.2, 0.5, 1, 5, 10, 20, 30, 50 μm
密封材質 EPDM, Viton, TPV
操作範圍 ∆P : 4.8 bar at 25°C, 1.4 bar at 50°C
ALL PFA濾芯

ALL PFA Filter Cartridges

型  式 ALL PFA濾芯
材  質 濾膜:親水性PTFE, 疏水性PTFE
支撐材:PFA
外殼、中柱、上下端蓋:PFA
O-ring:PTFE encapsulated Viton
精  度 10, 15, 20, 30 nm
0.05, 0.1, 0.2, 0.45, 1, 3, 5, 10 μm
規  格 4, 10, 20, 30 inch 及特殊尺寸規格
濾芯外徑 Ø69mm, Ø83mm
端  蓋 2-222平尾
操作範圍 ∆P : 5.0 bar at 25°C, 0.5 bar at 180°C
適用範圍 濕蝕刻, 精密化學品
粗胖型濾芯

Large Size Filter Cartridges

類  型 PP熔噴式, 纏繞式, 摺疊式, 活性碳
規  格 10, 20 inch
精  度 0.5, 1, 5, 10, 25, 50, 100 μm
最大流量 10 ~ 40 GPM
依濾材規格不同而有差別
適用範圍 PCW過濾, RO前置過濾, 清洗機台循環過濾, 化學品製程, 一般用水過濾
小型濾芯

Mini Chemical Filters

材  質 Polypropylene, Polyethersulfone,
Nylon, PTFE, PVDF, PFA
規  格 1/8″ , 1/4″ , Ø8mm Swagelok, 特殊接頭規格
精  度 10, 15, 20, 30 nm
0.05, 0.1, 0.2, 0.45, 1, 3, 5, 10 μm
操作範圍 4.0 bar at 25°C
適用範圍 光阻過濾, 液晶過濾
┃球型濾芯┃

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Proin urna nibh, laoreet vel lacinia sit amet

球型濾芯

Capsule Filters

材  質 Polypropylene, Polyethersulfone,
Nylon, PTFE, PVDF, Glass Fiber
規  格 Ø72 x 96 mm, Ø72 x 155 mm
口  徑 1/4″, 3/8″, 1/2″ NPTM
1/4″, 3/8″, 1/2″ Swagelok 及特殊尺寸規格
精  度 10, 15, 20, 30, 40, 50 nm
0.1, 0.2, 0.45, 0.6, 0.8,
1, 2, 3, 5, 10, 20, 30, 40, 70 μm
操作範圍 4.8 bar at 25°C
適用範圍 光阻過濾, 製藥業, 小流量過濾, 實驗製程, 氣體過濾
光阻油墨專用濾芯

Photoresist Filters

材  質 Polypropylene, Polyethersulfone,
Nylon, PTFE, PVDF, PFA
規  格 1/8″ , 1/4″ , Ø8mm Swagelok, 特殊接頭規格
精  度 10, 15, 20, 30 nm
0.05, 0.1, 0.2, 0.45, 1, 3, 5, 10 μm
操作範圍 4.0 bar at 25°C
適用範圍 光阻過濾, 液晶過濾
快拆式囊式濾芯

Quick-Change Capsule Filter Cartridge

規  格 5 inch: 無閥
10 inch: 無閥/有閥
材  質 Polypropylene, Polyethersulfone, Nylon, PTFE, Glass Fiber
精  度 0.1, 0.2, 0.45, 0.8, 1, 3, 5, 10, 15, 20, 30 μm
操作範圍 ∆P : 4.8 bar at 25°C
適用範圍 製藥業, 膠體過濾, Slurry過濾, 實驗製程
┃熔噴濾芯┃

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Proin urna nibh, laoreet vel lacinia sit amet

工業級熔噴濾芯

Melt-Blown Filter Cartridges

型  式 PP熔噴工業級濾芯
材  質 Polypropylene
規  格 5, 6, 9.75, 10, 19.5, 20, 29.25, 29.5, 30, 39, 40 inch 及特殊尺寸規格
精  度 1, 5, 10, 25, 50, 75, 100 μm
端  蓋 雙開口, 2-222平尾, 2-222火箭尾, 2-226平尾, 2-226火箭尾
操作範圍 ∆P : 3.0 bar at 25°C, 2.0 bar at 40°C, 1.0 bar at 60°C
適用範圍 PCB, 電鍍製程, RO前置過濾, 回收水過濾, 化學品製程, 石化製程, 飲料業
高濾效工業級熔噴濾芯

Industrial Melt-Blown Filter Cartridges

型  式 PP熔噴工業級高濾效濾芯
材  質 Polypropylene
規  格 5, 6, 9.75, 10, 19.5, 20, 29.25, 29.5, 30, 39, 40 inch 及特殊尺寸規格
精  度 0.5, 1, 5, 10, 25, 50, 75, 100 μm
端  蓋 雙開口, 2-222平尾, 2-222火箭尾, 2-226平尾, 2-226火箭尾
操作範圍 ∆P : 3.0 bar at 25°C, 2.0 bar at 50°C, 1.0 bar at 70°C
適用範圍 PCB, 電鍍製程, RO前置過濾, 回收水過濾, 化學品製程, 石化製程, 飲料業
絕對濾效熔噴濾芯

Absolute-Rated Melt-Blown Filter Cartridges

型  式 PP熔噴絕對濾效濾芯
材  質 Polypropylene
規  格 5, 6, 9.75, 10, 19.5, 20, 29.25, 29.5, 30, 39, 40 inch 及特殊尺寸規格
精  度 0.5, 1, 3, 5, 10, 25, 50, 75, 100 μm
端  蓋 雙開口, 2-222平尾, 2-222火箭尾, 2-226平尾, 2-226火箭尾
操作範圍 ∆P : 4.0 bar at 25°C, 2.0 bar at 60°C, 1.0 bar at 80°C
適用範圍 可撓性變形雜質製程, 化學品製程, 電鍍製程, 石化製程, 高溫高壓製程
粗胖型濾芯

Large Size Filter Cartridges

類  型 PP熔噴式, 纏繞式, 摺疊式, 活性碳
規  格 10, 20 inch
精  度 0.5, 1, 5, 10, 25, 50, 100 μm
最大流量 10 ~ 40 GPM
依濾材規格不同而有差別
適用範圍 PCW過濾, RO前置過濾, 清洗機台循環過濾, 化學品製程, 一般用水過濾
┃纏繞濾芯┃

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Proin urna nibh, laoreet vel lacinia sit amet

標準型纏繞濾芯

String-Wound Filter Cartridges

材  質 聚丙烯(Polypropylene), 漂白棉(Bleached Cotton), 玻璃纖維(Glass Fiber)
中柱材質 PP, SUS304, SUS316
規  格 9.75, 10, 19.5, 20, 29.25, 29.5, 30, 39, 40 inch 及特殊尺寸規格
精  度 1, 5, 10, 20, 30, 50, 75, 100, 150 μm
端  蓋 雙開口, 2-222平尾, 2-222火箭尾, 2-226平尾, 2-226火箭尾
PP材質
適用範圍		 PCB, 電鍍業, 化學品製程, 石化製程, 飲料業, 回收水過濾
Cotton材質
適用範圍		 溶劑, 超音波清洗, 化學品製程, 石化製程, 飲料業, 高溫製程, 蒸氣過濾
Glass Fiber材質
適用範圍		 250°C以下之高溫過濾
粗胖型濾芯

Large Size Filter Cartridges

類  型 PP熔噴式, 纏繞式, 摺疊式, 活性碳
規  格 10, 20 inch
精  度 0.5, 1, 5, 10, 25, 50, 100 μm
最大流量 10 ~ 40 GPM
依濾材規格不同而有差別
適用範圍 PCW過濾, RO前置過濾, 清洗機台循環過濾, 化學品製程, 一般用水過濾
┃活性碳濾芯┃

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Proin urna nibh, laoreet vel lacinia sit amet

碳棒式活性碳

Activated Carbon Block
Filter Cartridges

規  格 標準型: 10, 20, 30, 40 inch
大流量粗胖型: 10, 20 inch
適用範圍 PCB, 電鍍製程, RO前置過濾, 化學品製程, 一般用水過濾, 回收過濾
碳布式活性碳

Activated Carbon Nonwoven Fabric
Filter Cartridges

規  格 標準型: 10, 20, 30, 40 inch
大流量粗胖型: 10, 20 inch
適用範圍 PCB, 電鍍製程, RO前置過濾, 化學品製程, 一般用水過濾, 回收過濾
碳纖式活性碳

Carbon Impregnated Cellulose
Filter Cartridges

規  格 標準型: 10, 20, 30, 40 inch
大流量粗胖型: 10, 20 inch
適用範圍 PCB, 電鍍製程, RO前置過濾, 化學品製程, 一般用水過濾, 回收過濾
纏繞式活性碳

Granular Carbon PP String Wound
Filter Cartridges

規  格 標準型: 10, 20, 30, 40 inch
大流量粗胖型: 10, 20 inch
適用範圍 PCB, 電鍍製程, RO前置過濾, 化學品製程, 一般用水過濾, 回收過濾
客製活性碳

Customized Activated Carbon Nonwoven
Fabric Filter Cartridges

規  格 標準型: 10, 20, 30, 40 inch
大流量粗胖型: 10, 20 inch
適用範圍 PCB, 電鍍製程, RO前置過濾, 化學品製程, 一般用水過濾, 回收過濾
粗胖型濾芯

Large Size Filter Cartridges

類  型 PP熔噴式, 纏繞式, 摺疊式, 活性碳
規  格 10, 20 inch
精  度 0.5, 1, 5, 10, 25, 50, 100 μm
最大流量 10 ~ 40 GPM
依濾材規格不同而有差別
適用範圍 PCW過濾, RO前置過濾, 清洗機台循環過濾, 化學品製程, 一般用水過濾
┃濾袋┃

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Proin urna nibh, laoreet vel lacinia sit amet

標準型濾袋

Liquid Filter Bags

濾材材質 PP, PET, Nylon, Teflon, Nomex
及各種織布、不織布、吸油棉、活性碳
環口材質 PP, Nylon, Santoprene, 鍍鋅鐵環, 不鏽鋼環, 不鏽鋼彈片
環口規格 F環, G環, 其它
濾袋型式 車縫, 熱熔
精  度 0.5 ~ 1000 μm
濾袋規格 1號袋 (Ø17.8 cm × 42 cm, Q : 20 CMH)
2號袋 (Ø17.8 cm × 81 cm, Q : 45 CMH)
3號袋 (Ø10.1 cm × 23 cm, Q : 4.5 CMH)
4號袋 (Ø10.1 cm × 38 cm, Q : 10 CMH)
X系列 (Ø15 cm × 52 cm)
U系列 (Ø11.8 cm × 52 cm)
BP系列 (Ø22 cm × 43 cm)
Y系列 (Ø20 cm × 33 cm)
各類其它環口袋
高濾效絕對濾袋

High Performance Liquid Filter Bags

  • 創新熔接技術,將精密摺疊濾芯主濾材應用於濾袋,取代傳統大量層層堆疊提升濾效的方式,不但濾效提高,流量增加 20%,
    壓差降低 35%,也更容易安裝,並大幅減少廢棄物處理成本
  • 熔噴式超細奈米纖維為主要濾層,濾效可達 95% ~ 99.9%
  • 漸進式孔徑結構,提高濾袋容雜量,保持壓差穩定上升,延長使用壽命
  • 高符合 FDA CFR Title 21 認證通過之 PP 原料製作,使用安全有保障
  • 可提供客製配方,更符合使用需求
袋式摺疊濾芯

Bag Type High Flow Filter Cartridges

材  質 Polypropylene, Polyester
精  度 0.2, 0.5, 1, 5, 10, 20, 30, 50 μm
密封材質 EPDM, Viton, TPV
操作範圍 ∆P : 4.8 bar at 25°C, 1.4 bar at 50°C
吸油濾袋

Lorem Ipsum

標題 Lorem ipsum dolor sit amet, consectetur adipiscing elit.
標題 Lorem ipsum dolor sit amet, consectetur adipiscing elit.Lorem ipsum dolor sit amet, consectetur adipiscing elit.
標題 Lorem ipsum dolor sit amet, consectetur adipiscing elit.
濾布

Filter Clothes

材  質 PP, PET, Nylon, 吸油棉, 活性碳布
型  式 不織布, 織布, 刷毛織布, 編織網
精  度 0.5 ~ 1000 μm
逆洗專用濾布

Backwashable System Filter Bags

材  質 PTFE, PVDF, PPS, PP, PET
標  規 116, 140, 160 mm
特  規 30 ~ 300 mm
最大操作溫度 250°C(依材質而定)
精  度 1, 5, 10, 20, 50, 100 μm
壓濾機濾布

Filter Press Clothes

材  質 PP, PET
型  式 穿頸式, 披掛式 內嵌式, 走行式
規  格 穿頸式:500, 630, 800, 930, 1000, 1200 mm
披掛式:20, 24, 28, 30 inch
陽極袋

Anode Bag for Plating

材  質 PP, PET 織布
規  格 依電鍍特性選擇適合的材質及精度
精  度 25 ~ 100 μm
適用範圍 鍍銅, 錫, 鎳, 金, 銀, 鉻
┃不鏽鋼濾芯┃

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Proin urna nibh, laoreet vel lacinia sit amet

編織網摺疊濾芯

Pleated Wire Mesh Filter Cartridges

材  質 SUS304, SUS316, SUS316L
規  格 5, 10, 20, 30, 40 inch 及特殊尺寸規格
精  度 1 ~ 1000 μm
濾網型式 方孔網:平紋、斜紋
席型網:平紋、斜紋
反編織席型網:平紋、斜紋
三、五層燒結網
端  蓋 DOE, 2-222, 2-226, 各種鎖牙等型式
最大操作溫度 350°C
最大操作壓力 5 ~ 250 bar (特規製作)
適用範圍 CPF, CPL, 石化業, 酸鹼過濾, 高黏度, 高溫製程, 蒸氣過濾, 飲料業
金屬不織布濾芯

Pleated Non-woven Metal Fiber Filter Cartridges

材  質 SUS316, SUS316L
規  格 5, 10, 20, 30, 40 inch 及特殊尺寸規格
精  度 3 ~ 60 μm
濾網型式 金屬不織布
端  蓋 DOE, 2-222, 2-226, 各種鎖牙等型式
最大操作溫度 350°C
最大操作壓力 5 ~ 250 bar (特規製作)
適用範圍 CPF, CPL, 石化業, 酸鹼過濾, 高黏度, 高溫製程, 蒸氣過濾, 飲料業
五層燒結網濾芯

5-Layer Sintered Wire Mesh Filter Cartridges

材  質 SUS304, SUS316, SUS316L
規  格 5, 10, 20, 30, 40 inch 及特殊尺寸規格
精  度 1 ~ 200 μm
濾材型式 五層燒結網
端  蓋 DOE, 2-222, 2-226, 各種鎖牙等型式
最大操作溫度 350°C
最大操作壓力 5 ~ 250 bar (特規製作)
適用範圍 CPF, CPL, 石化業, 酸鹼過濾, 高黏度, 高溫製程, 蒸氣過濾, 飲料業
粉末燒結濾芯

Sintered Powder Metal Filter Cartridges

材  質 SUS304, SUS316, SUS316L
規  格 5, 10, 20, 30, 40 inch 及特殊尺寸規格
精  度 0.35 ~ 100 μm
濾材型式 金屬粉末燒結
端  蓋 DOE, 2-222, 2-226, 各種鎖牙等型式
最大操作溫度 350°C
最大操作壓力 5 ~ 250 bar (特規製作)
適用範圍 CPF, CPL, 石化業, 酸鹼過濾, 高黏度, 高溫製程, 蒸氣過濾, 飲料業
金屬過濾碟

Metal Fiber Leaf & Pack Disk Filter

材  質 SUS304, SUS316, SUS316L, 粉末燒結
規  格 外徑: 4.5″, 7″, 8.5″, 10″, 12″, 13.2″
內徑: 1.5″, 1.85″, 2.5″, 2.85″
圓形, 胚形, 腰形, 方形, 橢圓形及客製尺寸規格
精  度 1 ~ 1000 μm
每一層精度可依客戶要求製作
最大操作溫度 250°C
最大操作壓力 350 bar
適用範圍 聚酯切片, 聚合製程, 高黏度, 化纖紡絲, 工業特殊應用
Copyright © Taiwan Grace International Corp. All Rights Reserved.