Melt Blown Filter CartridgesPleated Filter CartridgesCapsule FiltersLiquid Filter BagsStainless Steel Filter CartridgesStainless Steel Cartridge Filter HousingsStainless Steel Bag Filter HousingsPlastic Housing
┃Melt Blown Filter Cartridges┃
Melt Blown Filter Cartridges
| Type | PP Melt-Blown Filter Cartridges |
| Material | Polypropylene |
| Length | 5, 6, 9.75, 10, 19.5, 20, 29.25, 29.5, 30, 39, 40 inch and customized |
| Micron Rating | 1, 5, 10, 25, 50, 75, 100 μm |
| End Cap | DOE, 2-222 Fin, 2-222 Flat, 2-226 Fin, 2-226 Flat |
| Operating Data | ∆P : 3.0 bar at 25°C, 2.0 bar at 40°C, 1.0 bar at 60°C |
| Applications | PCB, Electroplating, Reverse Osmosis Pretreatment, Reclaimed Water Treatment, Chemical and Petrochemical Processing, Food and Beverage |
Absolute-Rated Melt-Blown Filter Cartridges
| Type | PP Absolute-Rated Melt-Blown Filter Cartridges |
| Filter Media | Polypropylene |
| Length | 5, 6, 9.75, 10, 19.5, 20, 29.25, 29.5, 30, 39, 40 inch and customized |
| Micron Rating | 0.5, 1, 3, 5, 10, 25, 50, 75, 100 μm |
| End Cap | DOE, 2-222 Fin, 2-222 Flat, 2-226 Fin, 2-226 Flat |
| Operating Data | ∆P : 4.0 bar at 25°C, 2.0 bar at 60°C, 1.0 bar at 80°C |
| Applications | Flexible Particles Involving Process, Electroplating, Chemical and Petrochemical Processing, High Temperature and Pressure Manufacturing Process |
┃Pleated Filter Cartridges┃
High-Flow Pleated Filter Cartridges
| Filter Media | Polypropylene, Polyester |
| Length | 5, 10, 20, 30, 40 inch , other Customized Sizes |
| Micron Rating | 0.5, 1, 5, 10, 20, 30, 50, 100 μm |
| End Caps | DOE, 2-222 Flat, 2-222 Fin, 2-226 Flat, 2-226 Fin |
| Operating Data | ∆P : 3.0 bar at 25°C, 2.4 bar at 50°C |
| Applications | PCW, Pre RO/DI, Chemical Processing |
Mini Chemical Filters
| Filter Media | Polypropylene, Polyethersulfone, Nylon, PTFE, PVDF, PFA |
| Length | 1/8″ , 1/4″ , Ø8mm Swagelok, other Cuctomized Sizes |
| Micron Rating | 10, 15, 20, 30 nm 0.05, 0.1, 0.2, 0.45, 1, 3, 5, 10 μm |
| Operating Data | 4.0 bar at 25°C |
| Applications | Photoresist, TFT-LCD |
┃Capsule Filters┃
Capsule Filters
| Filter Media | Polypropylene, Polyethersulfone, Nylon, PTFE, PVDF, Glass Fiber |
| Size | Ø72 x 96 mm, Ø72 x 155 mm |
| Port Size | 1/4″, 3/8″, 1/2″ NPTM 1/4″, 3/8″, 1/2″ Swagelok , other Customized Sizes |
| Micron Rating | 10, 15, 20, 30, 40, 50 nm 0.1, 0.2, 0.45, 0.6, 0.8, 1, 2, 3, 5, 10, 20, 30, 40, 70 μm |
| Operating Data | 4.8 bar at 25°C |
| Applications | Photoresists, Pharmaceuticals, Small Volume Filtration,Laboratory Facilities, Air Filtration |
┃Liquid Filter Bags┃
Liquid Filter Bags
| Filter Media | PP, PET, Nylon, Teflon, Nomex Including various types of woven and non-woven fabrics, oil-absorbing fabrics, and activated carbon media. |
| Top Ring | PP, Nylon, Santoprene, Galvanized Steel, Stainless Steel |
| Ring Type | FSI, EATON and Others |
| Seam | Sewn, Welded |
| Micron Rating | 0.5 ~ 1000 μm |
| Size | #1 (Ø17.8 cm × 42 cm, Q : 20 CMH) #2 (Ø17.8 cm × 81 cm, Q : 45 CMH) #3 (Ø10.1 cm × 23 cm, Q : 4.5 CMH) #4 (Ø10.1 cm × 38 cm, Q : 10 CMH) X100 Series (Ø15 cm × 52 cm) U Series (Ø11.8 cm × 52 cm) BP Series (Ø22 cm × 43 cm) Y Series (Ø20 cm × 33 cm) Others |
┃Stainless Steel Filter Cartridges┃
Pleated Wire Mesh Filter Cartridges
| Material | SUS304, SUS316, SUS316L |
| Length | 5, 10, 20, 30, 40 inch and Customizable lengths available |
| Micron Rating | 1 ~ 1000 μm |
| Mesh Type | Plain Weave, Dutch Twill Weave, Plain Dutch Weave, Non-woven metal fiber, 3-or 5-layer sintered mesh |
| End Caps | DOE, 2-222, 2-226, and others |
| Max. Operating Temperature | 350°C |
| Max. Operating Pressure | 5 ~ 250 bar (based on specific requirements) |
| Applications | CPF, CPL, Petrochemical Processing, Acid/Alkali,High Density Treatment, Steam Filtration, Beverage Industry |
Pleated Non-woven Metal Fiber Filter Cartridges
| Material | SUS316, SUS316L |
| Length | 5, 10, 20, 30, 40 inch and Customizable lengths available |
| Non-woven metal fiber | 3 ~ 60 μm |
| Type | Metal Fiber Non-woven |
| End Caps | DOE, 2-222, 2-226, and others |
| Max. Operating Temperature | 350°C |
| Max. Operating Pressure | 5 ~ 250 bar (based on specific requirements) |
| Applications | CPF, CPL, Petrochemical Processing, Acid/Alkali,High Density Treatment, Steam Filtration, Beverage Industry |
5-Layer Sintered Wire Mesh Filter Cartridges
| Material | SUS304, SUS316, SUS316L |
| Length | 5, 10, 20, 30, 40 inch and Customizable lengths available |
| Micron Rating | 1 ~ 200 μm |
| Type | 5-Layer Sintered Wire Mesh |
| End Caps | DOE, 2-222, 2-226, and others |
| Max. Operating Temperature | 350°C |
| Max. Operating Pressure | 5 ~ 250 bar (based on specific requirements) |
| Applications | CPF, CPL, Petrochemical Processing, Acid/Alkali,High Density Treatment, Steam Filtration, Beverage Industry |
┃Stainless Steel Cartridge Filter Housings┃
Stainless Steel High Pressure Cartridge Filter Housings
| Filter Length | 5, 10, 20, 30, 40 inch |
| Number of Cartridges | 3~ 12 rounds |
| Material | SUS304, SUS316, SUS316L |
| In/Outlet | 1, 1.5, 2, 2.5, 3, 4 inch NPT, BSP, Flange, Clamp, Others |
| Flow Rate | 10″: 0 ~ 7 CMH 20″: 0 ~ 14 CMH 30″: 0 ~ 21 CMH 40″: 0 ~ 28 CMH *Above Flow rate is based on standard PP melt blown cartridge; Flow rate may vary according to different filter elements. High flow filter is optional to increase the flow and reduce the differential pressure. |
| Closure Type | Swing Bolt |
| Max. Operating Pressure | 10 bar |
| Applications | Reverse Osmosis Pretreatment, PCW Filtration, Circulating Filtration, Chemical Processing, Reclaimed Water Treatment, Beverage Industry |
Stainless Steel Sanitary Filter Housings
| Filter Length | 10, 20, 30, 40 inch |
| Number of Cartridges | single or multi-round |
| Material | SUS304, SUS316, SUS316L |
| In/Outlet | 1 ~ 6 inch Sanitary Clamp |
| Finish | Mechanical Polishing 400 mesh |
| Max. Operating Pressure | 7 bar Higher pressure housings can be customized |
| Applications | Pharmaceutical, Beverage Industry,Chemical Processing, Ultrapure Water Filtration |
Stainless Steel Single-Cartridge Filter Housings
| Filter Length | 5, 10, 20, 30, 40 inch Available in Ø145 mm for 10″ and 20″ models |
| Material | SUS304, SUS316 |
| In/Outlet | 3/4″, 1″ NPTF, 1.5″ Flange |
| Closure Type | V-Clamp |
| Flow rate | 0.5 ~ 10 CMH Flow rate may vary according to different model & element type |
| Filter Type | DOE, 2-222 Flat, 2-222 Fin |
| Max. Operating Pressure | 7 bar |
| Applications | Circulating Filtration System, PCW, Chemical Processing |
┃Stainless Steel Bag Filter Housings┃
Stainless Steel Bag Filter Housings
| Filter Size & Flow Rate | #1: up to 20 CMH #2: up to 45 CMH #3: up to 4.5 CMH #4: up to 10 CMH Flowr ate may vary according to different filter elements |
| Material | SUS304, SUS316, SUS316L |
| In/Outlet | 1, 1.5, 2, 2.5, 3, 4 inch NPT, BSP, Flange, Clamp, Others |
| Max. Operating Pressure | 7 bar |
| Applications | Reverse Osmosis Pretreatment, PCW Filtration, Circulating Filtration, Chemical Processing, Reclaimed Water Treatment, Beverage Industry |
┃Plastic Housing┃
Plastic Filter Housings
| Filter Length | 5, 10, 20 inch |
| Material | Clear: Styrene Acrylonitrile (SAN), Blue: Polypropylene (PP) |
| In/Outlet | 1/4″, 1/2″, 3/4″ NPTF |
| Type | O-ring quantity: Single, Double |
| Flow Rate | Up to 2.5 CMH Flow rate may vary according to different filter elements. |
| Filter Type | DOE |
| Color | Clear, Blue |
| Max.Operating Pressure | 7 bar at 25°C, 2 bar at 40°C |
| Applications | Circulating Filtration System,Reverse Osmosis Pretreatment, PCW Filtration |
Large-Size Plastic Filter Housings
| Filter Length | 10, 20 inch |
| Material | Clear: Styrene Acrylonitrile (SAN), Blue: Polypropylene (PP) |
| In/Outlet | 1″, 1.5″ NPTF |
| Type | O-ring quantity: Single, Double |
| Flow Rate | Up to 10 CMH Flow rate may vary according to different filter elements. |
| Filter Type | DOE |
| Color | Clear, Blue |
| Max. Operating Pressure | 7 bar at 25°C, 2 bar at 40°C |
| Applications | Circulating Filtration System,Reverse Osmosis Pretreatment, PCW Filtration |