Filter Cartridges for Semiconductor IndustryPleated Filter CartridgesCapsule FiltersMelt Blown Filter CartridgesString-Wound Filter CartridgesActivated Carbon Filter CartridgesLiquid Filter BagsStainless Steel Filter Cartridges
┃Filter Cartridges for Semiconductor Industry┃
ALL PTFE Filter Cartridges
TYPE | ALL PTFE Filter Cartridge |
Filter Media | Filter Media :Hydrophobic PTFE, Hydrophilic PTFE Support Layer:PTFE Cage Core EndCaps:PFA O-ring:PTFE encapsulated Viton |
Micron Rating | 10, 15, 20, 30 nm 0.05, 0.1, 0.2, 0.45, 1, 3, 5, 10 μm |
Length | 4, 10, 20, 30 inch other Cuctomized Sizes |
Outside Diameter | Ø69mm, Ø83mm |
End Cap | 2-222 Flat |
Operating Data | ∆P : 5.0 bar at 25°C, 0.5 bar at 180°C |
Applications | WEC(Wet Etch & Clean), Fine Chemicals, solvent |
ALL PFA Filter Cartridges for Wet Processing
TYPE | ALL PFA |
Material | Hydrophilic PTFE |
In/Outlet | 3/4″ Super |
Vent/Drain | 1/2″ Super |
Micron Rating | 0.03、0.05、0.1、0.2μm |
Max Operating Temperature | 200°C |
Operating Data | ∆P : 5.8 bar at 25°C, 0.97 bar at 200°C |
Applications | WEC(Wet Etch & Clean), Fine Chemicals, High temperature corrosion process |
┃Pleated Filter Cartridges┃
PP Fiber Pleated Filter Cartridges
Length | 5, 10, 20, 30, 40, 50, 60, 70 inch |
Outside Diameter | Ø65mm, Ø69mm, Ø83mm |
End Cap | DOE, 2-222 FLAT, 2-222 FIN, 2-226 FLAT, 2-226 FIN |
Gasket/O-ring | Silicone, EPDM, Viton, FEP Encapsulated Viton, PTFE |
Applications | RO/DI Process, Ink, Etchants, Developers, Chemicals, Medicine Filtration, Process Gases, Food & Beverage |
Filter Media | Polypropylene |
Micron Rating | 0.1, 0.2, 0.5, 0.8, 1, 2, 3, 5, 10, 20, 30, 40, 50, 70, 100 μm |
Operating Data | ∆P : 4.8 bar at 25℃, 1.4 bar at 80℃ |
PES Membrane Pleated Filter Cartridges
Length | 5, 10, 20, 30, 40, 50, 60, 70 inch |
Outside Diameter | Ø65mm, Ø69mm, Ø83mm |
End Cap | DOE, 2-222 FLAT, 2-222 FIN, 2-226 FLAT, 2-226 FIN |
Gasket/O-ring | Silicone, EPDM, Viton, FEP Encapsulated Viton, PTFE |
Applications | RO/DI Process, Chemicals, Medicine Filtration, Food & Beverage, Cooling water circulation |
Filter Media | Polyethersulfone |
Micron Rating | 0.04, 0.1, 0.2, 0.45, 0.8, 1.2, 5 μm |
Operating Data | ∆P : 4.8 bar at 25°C, 1.4 bar at 80°C |
Hydrophobic PTFE Membrane Pleated Filter Cartridges
Length | 5, 10, 20, 30, 40, 50, 60, 70 inch |
Outside Diameter | Ø65mm, Ø69mm, Ø83mm |
End Cap | DOE, 2-222 FLAT, 2-222 FIN, 2-226 FLAT, 2-226 FIN |
Gasket/O-ring | Silicone, EPDM, Viton, FEP Encapsulated Viton, PTFE |
Applications | RO/DI Process, Chemicals, Medicine Filtration, Food & Beverage, Cooling water circulation |
Filter Media | Hydrophobic PTFE |
Micron Rating | 10, 15, 20, 30nm 0.05, 0.1, 0.2, 0.45, 1, 3, 5, 10 μm |
Operating Data | ∆P : 4.8 bar at 25°C, 2.1 bar at 90°C |
Hydrophilic PTFE Membrane Pleated Filter Cartridges
Length | 5, 10, 20, 30, 40, 50, 60, 70 inch |
Outside Diameter | Ø65mm, Ø69mm, Ø83mm |
End Cap | DOE, 2-222 FLAT, 2-222 FIN, 2-226 FLAT, 2-226 FIN |
Gasket/O-ring | Silicone, EPDM, Viton, FEP Encapsulated Viton, PTFE |
Applications | RO/DI Process, Chemicals, Medicine Filtration, Food & Beverage, Cooling water circulation |
Filter Media | Hydrophilic PTFE |
Micron Rating | 10, 15, 20, 30nm 0.05, 0.1, 0.2, 0.45, 1, 3, 5, 10 μm |
Operating Data | ∆P : 4.8 bar at 25°C, 2.1 bar at 90°C |
PSU Membrane Pleated Filter Cartridges
Length | 5, 10, 20, 30, 40, 50, 60, 70 inch |
Outside Diameter | Ø65mm, Ø69mm, Ø83mm |
End Cap | DOE, 2-222 FLAT, 2-222 FIN, 2-226 FLAT, 2-226 FIN |
Gasket/O-ring | Silicone, EPDM, Viton, FEP Encapsulated Viton, PTFE |
Applications | RO/DI Process, Chemicals, Medicine Filtration, Food & Beverage, Cooling water circulation |
Filter Media | Polysulfone |
Micron Rating | 0.05, 0.1, 0.2, 0.45, 0.6, 1 μm |
Operating Data | ∆P : 4.8 bar at 25°C, 2.1 bar at 90°C |
PVDF Membrane Pleated Filter Cartridges
Length | 5, 10, 20, 30, 40, 50, 60, 70 inch |
Outside Diameter | Ø65mm, Ø69mm, Ø83mm |
End Cap | DOE, 2-222 FLAT, 2-222 FIN, 2-226 FLAT, 2-226 FIN |
Gasket/O-ring | Silicone, EPDM, Viton, FEP Encapsulated Viton, PTFE |
Applications | RO/DI Process, Chemicals, Medicine Filtration, Food & Beverage, Cooling water circulation |
Filter Media | PVDF |
Micron Rating | 0.1, 0.2, 0.45, 1 μm |
Operating Data | ∆P : 4.8 bar at 25°C, 2.1 bar at 90°C |
Nylon Membrane Pleated Filter Cartridges
Length | 5, 10, 20, 30, 40, 50, 60, 70 inch |
Outside Diameter | Ø65mm, Ø69mm, Ø83mm |
End Cap | DOE, 2-222 FLAT, 2-222 FIN, 2-226 FLAT, 2-226 FIN |
Gasket/O-ring | Silicone, EPDM, Viton, FEP Encapsulated Viton, PTFE |
Applications | RO/DI Process, Chemicals, Medicine Filtration, Food & Beverage, Cooling water circulation |
Filter Media | Nylon |
Micron Rating | 5, 10, 20, 50 nm 0.1, 0.2, 0.45, 1 μm |
Operating Data | ∆P : 4.8 bar at 25°C, 2.1 bar at 90°C |
Glass Fiber Pleated Filter Cartridges
Length | 5, 10, 20, 30, 40, 50, 60, 70 inch |
Outside Diameter | Ø65mm, Ø69mm, Ø83mm |
End Cap | DOE, 2-222 FLAT, 2-222 FIN, 2-226 FLAT, 2-226 FIN |
Gasket/O-ring | Silicone, EPDM, Viton, FEP Encapsulated Viton, PTFE |
Applications | RO/DI Process, Chemicals, Medicine Filtration, Food & Beverage, Cooling water circulation |
Filter Media | GLASS FIBER |
Micron Rating | 0.2, 0.45, 1, 5, 10 μm |
Operating Data | ∆P : 4.8 bar at 25°C, 2.1 bar at 90°C |
Nano Pleated Filter Cartridges
Length | 5, 10, 20, 30, 40, 50, 60, 70 inch |
Outside Diameter | Ø65mm, Ø69mm, Ø83mm |
End Cap | DOE, 2-222 FLAT, 2-222 FIN, 2-226 FLAT, 2-226 FIN |
Gasket/O-ring | Silicone, EPDM, Viton, FEP Encapsulated Viton, PTFE |
Applications | Semiconfuctor, RO/DI Process, Chemicals, Medicine Filtration |
Filter Media | Hydrophobic/Hydrophilic PTFE | Nylon |
Micron Rating | 10, 15, 20, 30, 50 nm | 5, 10, 20, 50 nm |
Operating Data | ∆P : 4.8 bar at 25°C, 2.1 bar at 90°C |
334 Series High-Flow Filter Cartridges
Filter Media | Polypropylene | Polyethersulfone |
Micron Rating | 0.2, 0.5, 0.8, 1, 3, 5, 10, 20, 30, 40, 50, 70, 100 μm |
0.04, 0.1, 0.2, 0.45, 0.6, 0.8, 1.2 μm |
Material | PTFE | SUS |
Micron Rating | 0.05, 0.1, 0.2, 0.45, 1, 3, 5, 10 μm |
1, 2, 3, 5, 10, 20, 30, 50, 70, 100 μm |
O-ring | EPDM, Viton, FEP Encapsulated Viton | |
Operating Data | ∆P : 4.8 bar at 25°C, 3.4 bar at 50°C, 1.4 bar at 80°C |
233 Series High-Flow Filter Cartridges
Filter Media | Polypropylene | Polyethersulfone |
Micron Rating | 0.2, 0.5, 0.8, 1, 3, 5, 10, 20, 30, 40, 50, 70, 100 μm |
0.04, 0.1, 0.2, 0.45, 0.6, 0.8, 1.2 μm |
Filter Media | Hydrophobic PTFE | Hydrophilic PTFE |
Micron Rating | 0.05, 0.1, 0.2, 0.45, 1, 3, 5, 10 μm |
0.05, 0.1, 0.2, 0.45, 1, 3, 5, 10 μm |
O-ring | EPDM, Viton, FEP Encapsulated Viton | |
Operating Date | ∆P : 4.8 bar at 25°C, 3.4 bar at 50°C, 1.4 bar at 80°C |
P-type High-Flow Filter Cartridges
Filter Media | Polypropylene, Polyester, Glass Fiber, Stainless Steel |
Length | 20, 40, 60 inch and Customized |
Micron Rating | 0.2, 0.5, 1, 5, 10, 20, 40, 50, 70, 100 μm |
Flow Rate | 20″:40 CMH , 40″:85 CMH ,60″:110 CMH |
Operating Date | ∆P : 4.8 bar at 25°C |
Applications | Pre RO/DI, PCW , Recycled Water, High-Flow Filtration, Petrochemical Processing |
ALL PTFE Filter Cartridges
TYPE | ALL PTFE Filter Cartridges |
Filter Media | Hydrophobic PTFE, Hydrophilic PTFE Support Layer:PFA Cage、Core、End Caps:PFA O-ring:PFA Encapsulated Viton |
Micron Rating | 10, 15, 20, 30 nm 0.05, 0.1, 0.2, 0.45, 1, 3, 5, 10 μm |
Length | 4, 10, 20, 30 inch other Customized Sizes |
Outside Diameter | Ø69mm, Ø83mm |
End Cap | 2-222 Flat |
Operating Data | ∆P : 5.0 bar at 25°C, 0.5 bar at 180°C |
Applications | WEC(Wet Etch & Clean), Fine Chemicals |
High-Flow Pleated Filter Cartridges
Filter Media | Polypropylene, Polyester |
Length | 5, 10, 20, 30, 40 inch other Cuctomized Sizes |
Micron Rating | 0.5, 1, 5, 10, 20, 30, 50, 100 μm |
End Cap | DOE, 2-222 FLAT, 2-222 FIN, 2-226 FLAT, 2-226 FIN |
Operating Data | ∆P : 3.0 bar at 25°C, 2.4 bar at 50°C |
Applications | PCW, Pre RO/DI, Chemical Processing |
┃Capsule Filters┃
Capsule Filters
Filter Media | Polypropylene, Polyethersulfone, Nylon, PTFE, PVDF, Glass Fiber |
Length | Ø72 x 96 mm, Ø72 x 155 mm |
Port Size | 1/4″, 3/8″, 1/2″ NPTM 1/4″, 3/8″, 1/2″ Swagelok other Customized Sizes |
Micron Rating | 10, 15, 20, 30, 40, 50 nm 0.1, 0.2, 0.45, 0.6, 0.8, 1, 2, 3, 5, 10, 20, 30, 40, 70 μm |
Operating Data | 4.8 bar at 25°C |
Applications | Photoresists, Pharmaceuticals, Small Volume Filtration,Laboratory Facilities, Air Filtration |
Quick-Change Capsule Filter Cartridge
Type | 5 inch: without valve 10 inch: without valve/ with valve 20 inch: with valve |
Filter Media | Polypropylene, Polyethersulfone, Nylon, PTFE, Glass Fiber |
Micron Rating | 0.1, 0.2, 0.3, 0.5, 0.8, 1, 3, 5, 10, 15, 20, 30 μm |
Operating Data | ∆P : 4.8 bar at 25°C |
Applications | Medicine,Gel,Slurry Filtration |
┃Melt Blown Filter Cartridges┃
Melt-Blown Filter Cartridges
Type | PP Melt-Blown Filter Cartridges |
Material | Polypropylene |
Length | 5, 6, 9.75, 10, 19.5, 20, 29.25, 29.5, 30, 39, 40 inch other Customized Sizes |
Micron Rating | 1, 5, 10, 25, 50, 75, 100 μm |
End Cap | DOE, 2-222 FLAT, 2-222 FIN, 2-226 FLAT, 2-226 FIN |
Operating Data | ∆P : 3.0 bar at 25°C, 2.0 bar at 40°C, 1.0 bar at 60°C |
Applications | PCB, Electroplating, Reverse Osmosis Pretreatment, Reclaimed Water Treatment, Chemical and Petrochemical Processing, Food and Beverage |
Industrial Melt-Blown Filter Cartridges
Type | PP Industrial Melt-Blown Filter Cartridges |
Material | Polypropylene |
Length | 5, 6, 9.75, 10, 19.5, 20, 29.25, 29.5, 30, 39, 40 inch other Customized Sizes |
Micron Rating | 0.5, 1, 5, 10, 25, 50, 75, 100 μm |
End Cap | DOE, 2-222 FLAT, 2-222 FIN, 2-226 FLAT, 2-226 FIN |
Operating Data | ∆P : 3.0 bar at 25°C, 2.0 bar at 50°C, 1.0 bar at 70°C |
Applications | PCB, Electroplating, Reverse Osmosis Pretreatment, Reclaimed Water Treatment, Chemical and Petrochemical Processing, Food and Beverage |
Absolute-Rated Melt-Blown Filter Cartridges
Type | PP Absolute-Rated Melt-Blown Filter Cartridges |
Material | Polypropylene |
Length | 5, 6, 9.75, 10, 19.5, 20, 29.25, 29.5, 30, 39, 40 inch other Customized Sizes |
Micron Rating | 0.5, 1, 3, 5, 10, 25, 50, 75, 100 μm |
End Cap | DOE, 2-222 FLAT, 2-222 FIN, 2-226 FLAT, 2-226 FIN |
Operating Data | ∆P : 4.0 bar at 25°C, 2.0 bar at 60°C, 1.0 bar at 80°C |
Applications | Flexible Particles Involving Process, Electroplating, Chemical and Petrochemical Processing, High Temperature and Pressure Manufacturing Process |
┃String-Wound Filter Cartridges┃
String-Wound Filter Cartridges
Material | Polypropylene,Bleached Cotton,Glass Fiber |
Central Core | PP, SUS304, SUS316 |
Length | 9.75, 10, 19.5, 20, 29.25, 29.5, 30, 39, 40 inch other Customized Sizes |
Micron Rating | 1, 5, 10, 20, 30, 50, 75, 100, 150 μm |
End Cap | DOE, 2-222 FLAT, 2-222 FIN, 2-226 FLAT, 2-226 FIN |
PP Type Applications |
PCB, Electroplating, Chemical and Petrochemical Processing,Reclaimed Water Treatment, Food and Beverage |
Cotton Type Applications |
Solvent, Ultrasonic cleaning, Chemical and Petrochemical Processing, Beverage Industry, High Temeprature Processes, Steam Filtration |
Glass Fiber Type Applications |
High Temperature Filtration up to 250°C |
┃Activated Carbon Filter Cartridges┃
┃Liquid Filter Bags┃
Liquid Filter Bags
Filter Media | PP, PET, Nylon, Teflon, Nomex Including various types of woven and non-woven fabrics, oil-absorbing fabrics, and activated carbon media. |
Top Ring | PP, Nylon, Santoprene, Galvanized Steel, Stainless Steel |
Ring Type | F Ring, G Ring and Others |
Seam | Sewn, Welded |
Micron Rating | 0.5 ~ 1000 μm |
Size | #1 (Ø17.8 cm × 42 cm, Q : 20 CMH) #2 (Ø17.8 cm × 81 cm, Q : 45 CMH) #3 (Ø10.1 cm × 23 cm, Q : 4.5 CMH) #4 (Ø10.1 cm × 38 cm, Q : 10 CMH) X100 Series (Ø15 cm × 52 cm) U Series (Ø11.8 cm × 52 cm) BP Series (Ø22 cm × 43 cm) Y Series (Ø20 cm × 33 cm) Others |
High Performance Liquid Filter Bags
Filter Media | Polypropylene |
Top Ring | PP, Nylon, Santoprene, Galvanized Steel, Stainless Steel |
Ring Type | F Ring, G Ring and Others |
Size | #1 (Ø17.8 cm × 42 cm) #2 (Ø17.8 cm × 81 cm) |
Seam | Welded |
Operating Data | ∆P : 3.0 bar at 25°C, 2.4 bar at 50°C |
Applications | PCW, Pre RO/DI, Chemical Processing |
Oil Absorption Liquid Filter Bags
- The progressive pore size increases dirt holding capacity of the filter bag, keeps the differential pressure rising steadily and extends filter life.
- Customized formulations are available to meet users’ specific requirements.
- PP raw material complies with FDA 21 CFR, which is safe and secure.
- Customized formula can be provided to satisfy user’s requirement.
┃Stainless Steel Filter Cartridges┃
Pleated Wire Mesh Filter Cartridges
Material | SUS304, SUS316, SUS316L |
Length | 5, 10, 20, 30, 40 inch and Customizable lengths available |
Micron Rating | 1 ~ 1000 μm |
Mesh Type | Plain Weave, Dutch Twill Weave, Plain Dutch Weave, Non-woven metal fiber, 3-or 5-layer sintered mesh |
End Caps | DOE, 2-222, 2-226, and others |
Max. Operating Temperature | 350°C |
Max. Operating Pressure | 5 ~ 250 bar (based on specific requirements) |
Applications | CPF, CPL, Petrochemical Processing, Acid/Alkali,High Density Treatment, Steam Filtration, Beverage Industry |
Pleated Non-woven Metal Fiber Filter Cartridges
Material | SUS316, SUS316L |
Length | 5, 10, 20, 30, 40 inch and Customizable lengths available |
Micron Rating | 3 ~ 60 μm |
Type | Non-woven metal fiber |
End Caps | DOE, 2-222, 2-226, and others |
Max. Operating Temperature | 350°C |
Max. Operating Pressure | 5 ~ 250 bar (based on specific requirements) |
Applications | CPF, CPL, Petrochemical Processing, Acid/Alkali,High Density Treatment, Steam Filtration, Beverage Industry |
5-Layer Sintered Wire Mesh Filter Cartridges
Material | SUS304, SUS316, SUS316L |
Length | 5, 10, 20, 30, 40 inch and Customizable lengths available |
Micron Rating | 1 ~ 200 μm |
Type | 5-Layer Sintered Wire Mesh |
End Caps | DOE, 2-222, 2-226, and others |
Max. Operating Temperature | 350°C |
Max. Operating Pressure | 5 ~ 250 bar (based on specific requirements) |
Applications | CPF, CPL, Petrochemical Processing, Acid/Alkali,High Density Treatment, Steam Filtration, Beverage Industry |
Sintered Powder Metal Filter Cartridges
Material | SUS304, SUS316, SUS316L |
Length | 5, 10, 20, 30, 40 inch and Customizable lengths available |
Micron Rating | 0.35 ~ 100 μm |
Type | Metal Sintered Powder |
End Caps | DOE, 2-222, 2-226, and others |
Max. Operating Temperature | 350°C |
Max. Operating Pressure | 5 ~ 250 bar (based on specific requirements) |
Applications | CPF, CPL, Petrochemical Processing, Acid/Alkali,High Density Treatment, Steam Filtration, Beverage Industry |